Research 2014 Archives - JICA Project for AUN/SEED-Net

Two-phase Flow Boiling Heat Transfer, Pressure Drop and Flow Pattern of Natural Refrigerants in Microchannels

Program: Collaborative Research Program for Alumni (CRA) Field: Chemical Principal Investigator: Dr. Pham Tuan Anh Sending University: Ho Chi Minh City University of Technology (HCMUT), Vietnam Japanese Co-Investigator: Prof. Dr. Akihiko AZETSU Japanese University: Tokai University Year: 2014 Abstract: The research project first was the combination work between Department of Process and Equipment/Faculty of Chemical Engineering (HCMUT) and Key-laboratory for Internal Combustion Engine (HCMUT). Biodiesel fuel from rubber seed oil was produced in Department of Process and Equipment by [...]

30/03/2015|Categories: Cambodia, Chemical Engineering, CRA, Research 2014, Vietnam|

A Comparative study of Thermal Comfort, Occupant Behavior and Energy Consumption in Office Building between Hot Humid Country and Japan

Program: Collaborative Research for Common Regional Issues (CRC) Field: Energy Engineering Principal Investigator: Dr. Sheikh Ahmad Zaki Bin Shaikh Salim Sending University: Universiti Teknologi Malaysia (UTM) Japanese Co-Investigator: Prof. Dr. Aya HAGISHIMA Japanese University: Kyushu University Year: 2014

31/03/2014|Categories: CRC, Energy Engineering, Malaysia, Research 2014|

Vision-based Vehicle Count and Traffic Flows Estimation

Program: Collaborative Research for Common Regional Issues (CRC) Field: Computer and Information Engineering Principal Investigator: Dr. LE Thanh-Sach Sending University: Ho Chi Minh City University of Technology (HCMUT) Japanese Co-Investigator: Prof. Dr. Kazuhiko HAMAMOTO Japanese University: Tokai University Year: 2014

31/03/2014|Categories: Computer and Information Engineering, CRC, Research 2014, Vietnam|

Floating Sensor Modules for River Monitoring System

Program: Collaborative Research for Common Regional Issues (CRC) Field: Electrical and Electronics Engineering Principal Investigator: Dr. Zool Hilmi Ismail Sending University: Universiti Teknologi Malaysia (UTM) Japanese Co-Investigator: Prof. Dr. Toru NAMERIKAWA Japanese University: Keio University Year: 2014 Abstract: Technological advances and pressing management problems have coerced the development of a new mode of riverine monitoring system. Many human benefits derived from the earths ecosystems are contingent on knowing the current condition of the said ecosystems, understanding the controls on those [...]

31/03/2014|Categories: CRC, Electrical and Electronics Engineering, Malaysia, Research 2014|

Waste plastic to oil, optimization process for fuel production

Program: Collaborative Research with Industry (CRI) Field: Energy Engineering Principal Investigator: Assoc. Prof. Van Dinh Son Tho Sending University: Hanoi University of Science and Technology (HUST) Japanese Co-Investigator: Prof. Dr. Kunio YOSHIKAWA Japanese University: Tokyo Institute of Technology Year: 2014 Abstract: Collaboration between Industry and University: Support 6 times travel of Japanese professor to Vietnam. During two year, the research group had opportunity to visit more than 27 companies and organization. Open discussion for science research activities and technology was [...]

31/03/2014|Categories: CRI, Energy Engineering, Research 2014, Vietnam|

Seismic Microzonation of Mandalay City through 1D Seismic Response Analysis by Equivalent Linear Method Based on Borehole Survey and Microtremore Survey in Myanmar

Program: Collaborative Research for Common Regional Issues (CRC) Field: Geological and Geo-Resource Engineering Principal Investigator: Assoc. Prof. Dr. Tun Naing Sending University: University of Yangon (UY) Japanese Co-Investigator: Prof. Dr. Hiroshi KAWASE Japanese University: Kyoto University Year: 2014 Abstract: Myanmar is an earthquake-prone country like other countries such as Indonesia, Thailand and so on in ASEAN. The proposed research area, Mandalay, is one of the most populated and socio-economically important cities in Myanmar. It is located in high seismic prone [...]

31/03/2014|Categories: CRC, Geological and Geo-Resource Engineering, Myanmar, Research 2014|

Dynamic Friction Behaviors of Fluid Power Actuators and Their Mathematical Model

Program: Collaborative Research for Alumni Members (CRA) Field: Mechanical and Manufacturing Engineering Principal Investigator: Dr. Tran Xuan Bo Sending University: Hanoi University of Science and Technology (HUST) Japanese Co-Investigator: Prof. Dr. Hideki YANADA Japanese University: Toyohashi University of Technology Year: 2014 Abstract: Friction plays an important aspect in many control systems including fluid power systems. Friction is highly nonlinear and may lead to control errors, limit cycles, undesired stick-slip motion and poor performance of a fluid power system. It is, [...]

31/03/2014|Categories: CRA, Mechanical and Manufacturing Engineering, Research 2014, Vietnam|

Design and construction of open wind tunnel with testing systems

Program: Collaborative Research with Industry (CRI) Field: Civil Engineering Principal Investigator: Dr. TRAN Tien Anh Sending University: Ho Chi Minh City University of Technology (HCMUT) Japanese Co-Investigator: Prof. Dr. Hiromichi SHIRATO Japanese University: Kyoto University Year: 2014 Abstract: With this project, we would like to design and construct an open wind tunnel having maximum velocity of 15m/s at testing section. Measuring system is also designed and set up so that we can measure aerodynamic forces and moments on testing models, [...]

31/03/2014|Categories: Civil Engineering, CRI, Research 2014, Vietnam|

Near-Net shape processing of Ti-Al composite with nano scale in situ Al2O3 reinforcement apply for automotive industry

Program: Collaborative Research with Industry (CRI) Field: Materials Engineering Principal Investigator: Dr. Tran Duc Huy Sending University: Hanoi University of Science and Technology (HUST) Japanese Co-Investigator: Prof. Dr. Keiichi ISHIHARA Japanese University: Kyoto University Year: 2014 Abstract: The use of titanium and its alloys has increased recently, because of their superior properties and improvements in machinability of these alloys. Main strengths of titanium-based alloys are their low density (nickel-based alloys are twice denser than titanium-based alloys), high strength at elevated [...]

31/03/2014|Categories: CRI, Materials Engineering, Research 2014, Vietnam|

Preparation of Bioscaffold Material from Decellularization of Cartilage for Tissue Engineering Application

Program: Collaborative Research with Industry (CRI) Field: Materials Engineering Principal Investigator: Prof. Dr. Tatsuo Kitajima Assoc. Prof. Ir. Dr. Azran Azhim (Former) Universiti Islam Antarabangsa Malaysia Sending University: Universiti Teknologi Malaysia (UTM) Japanese Co-Investigator: Prof. Dr. Takashi USHIDA Japanese University: The University of Tokyo Year: 2014 Abstract: According to World Health Organization (WHO), “Osteoarthritis (OA) is the highest-ranking disease among the musculoskeletal diseases and contributes to approximately 50% of the disease burden in this disease group”. Therefore, a research regarding [...]

31/03/2014|Categories: CRI, Malaysia, Materials Engineering, Research 2014|